Table of Contents
Advertisement
Step 4
4-1. Slide the top cover back to the carrier body by sliding forward to secure. (Fig.6)
Step 5
5-1. Slide the carrier body into the recorder and push carrier body further into
cartridge frame until fully inserted. (Fig.7 and Fig.8)
5> CONNECTING EXTERNAL HARD DISK DRIVE
For installing hard disk drive, please connect recorder and external hard disk drive case
with a power cord and a flat wire, which come with hard disk drive case. Refer to the
following pictures.
*Note: To turn the recorder off before install.
40 Pin IDE Flat Cable
Fig. 7
Power Cord
15
Fig. 6
Fig. 8
Hard Disk Drive Case
Version 1.2
Advertisement
Table of Contents
