Table of Contents
Advertisement
1.2>[M] / [S]
[M] : Images are recorded to mater hard disk drive.
¡ ½
[S] : Images are recorder to slave hard disk drive.
¡ ½
1.3> (A) / (S) / (-)
(A) : The recorder records continuously.
¡ ½
(S) : The recorder reacts to start recording while activated by any sensor
¡ ½
connected tothe recorder.
(-) : No recording.
¡ ½
1.4>[R]
The symbol [R] means that the recorder is recording. It also indicates which
channel is recorded.
1.5> 16%
This symbol indicates the percentage of the running HDD capacity storing images.
16%
1.6> 24% [OVWR]
This symbol means that the recorder is in OVERWRITE mode. At the 24 % of the
HDD capacity is saved with new data.
24%
84%
The whole capacity of the HDD
Image Data
The whole capacity of the HDD
New Data
20
No Data
76%
Earlier Data
Version 1.2
Advertisement
Table of Contents
