Table of Contents
Advertisement
4.3> Key lock
A
Segment
B
C
4.4> Installing Hard Drive into Cartridge
Step 1
1-1 . Pull the active-handle outwards and use the miniature key
insert into the keyhole, turning the key anti-clockwise, then the handle will
auto-eject for pulling out. (Fig.1)
1-2. Pull the handle outwards to remove the carrier body away from the cartridge
frame.
(Fig.2)
Step 2
2-1. Push the release latch to slide the top cover backwards and remove. (Fig.3)
Step 3
3-1. Insert the DC power cable and IDE cable on the HDD. (Fig.4)
3-2. Position the HDD into carrier body and secure the HDD using the four 6#-32
screws provided.
Status
Power status
A
ON
B
OFF
C
OFF
Fig. 1
Fig. 3
(Fig.5)
Fig. 4
14
Security status
Locked (Non-removable)
Locked (Non-removable)
Unlocked (Removable)
Fig. 2
provided and
Fig. 5
Version 1.2
Advertisement
Table of Contents
