Troubleshooting; Overview; Error And Alarm Indications; Correcting Errors - Kodak DryView 6800 User Manual

3

Troubleshooting

Overview

Error and Alarm Indications

Correcting Errors

Correcting Film Jams
With the Imager
Powered ON
January 17, 2007
Occasionally, error conditions, such as film jams, may occur in the 6800
Laser Imager. You can easily correct minor problems. If more serious
conditions occur, contact a trained Authorized Service Provider of Kodak
Products (see "Calling for Support" on page
The 6800 Laser Imager can detect errors and other conditions that require
operator action. These errors or abnormal conditions are reported on the
touch screen. Error indications can also be found on the following:
• Error History screen - lists the last 5 errors that have occurred in the
Imager. From the Main Screen, touch:
Utilities>View System Info>Error history
• Troubleshooting screen - lets you view all errors by error number or to
view all jams that have occurred in the Imager. From the Main Screen
touch the Help button, then select the Troubleshooting tab.
For more information on troubleshooting see,
page 3-1 and "Correcting Film Jams With the Imager Powered ON" on
page 3-1.
Do the following from the Troubleshooting screen on the local panel.
Select View errors by number.
1.
Touch OK.
2.
Select the error.
3.
Touch View.
4.
Follow the directions in the Error Correction box.
5.
NOTE: If available, touch the Show Me button to view a video of the
corrective action.
Do the following from the Troubleshooting screen on the local panel.
Select Film jam list.
1.
Touch OK.
2.
8F2927
3-2).
"Correcting Errors" on
3-1