Network Requirements; Film; Film Types; Film Sizes - Kodak DryView 6800 User Manual

Specifications

Network Requirements

Film

Film Types

Film Sizes

6-4
be provided within 2.5 m (8 ft) of the Imager.
Area
• 120 V AC +6% to -10%, 60 Hz ±3Hz
North and Central
America
• 208 V AC ±10%, 60 Hz ±3Hz
• 240 V AC ±10%, 60 Hz ±3Hz
NOTE: For 120 V AC installations, a 20 A service is
Europe 230 V AC ±10%, 50/60 Hz ±3Hz
Japan 100 V AC ±10%, 50/60 Hz ±3Hz
The wire must be insulation-rated for 600 V. A dedicated line is
recommended.
The 6800 Laser Imager receives digital images from medical imaging devices
(modalities) over a 10/100 Base T Ethernet Network. A single 10/100 Base T
Ethernet Network connection via CAT 5 UTP cable terminating in an RJ-45
plug must be located within 3.05 m (10 ft) of the rear of the Imager.
Prior to installation you must order and have on hand Kodak DryView Laser
Imaging Film. Contact your sales representative if you have questions.
The 6800 Laser Imager accommodates the following film types:
• Kodak DryView DVB Laser Imaging Film
• Kodak DryView DVC Laser Imaging Film
• Kodak DryView DVB+ Laser Imaging Film
• Kodak DryView DVB+ Premium Laser Imaging Film
• Kodak DryView Mammography Laser Imaging Film
• Kodak DryView Mammography Plus Laser Imaging Film
NOTE: Not all film types are available in every country.
The 6800 Laser Imager accommodates the following film sizes:
• For DVB, DVB+, DVB+ Premium, and DVC Laser Imaging Film:
– 20 x 25 cm (8 x 10 in.)
– 25 x 30 cm (10 x 12 in.)
– 28 x 35 cm (11 x 14 in.)
– 35 x 35 cm (14 x 14 in.)
8F927
Power
required.
January 17, 2007