Watertight Timer Reset Panel Br-550 (Option) - Furuno BR-500 Operator's Manual

4. INSTALLATION
6. Fasten the Chassis to the Mount Case with binding screws (supplied)
7. Fasten the signal cable to the Clamp with a cable tie.
4.6

Watertight Timer Reset Panel BR-550 (option)

Follow the mounting considerations in section 4.2 Mounting Considerations when se-
lecting a location. Refer to the outline drawing at the back of this manual for dimen-
sions.
1. Pass the signal cable through the gland and then the Nut of the Waterproof Case.
Pass the cable into the unit. Process the cable as shown on page 4-14.
4-8
Cable Tie