Table of Contents
Advertisement
on the SATA 150 PCI Raid Card 2-Channel
5.
Follow the same instructions to connect up to two hard drives.
Device connection is now complete.
6.
Replace the computer cover and reconnect the power cord.
RAID Arrays
RAID Arrays are setup in the SATA 150 PCI RAID Card 2-Channel's
BIOS.
RAID 0 (Striping)
This RAID array to be used on New/Blank hard drives. Striping will
destroy existing data on the hard drive. Auto Configuration is
recommended. For applications that require custom chunk size,
Manual Configuration is offered.
Auto configuration (recommended)
The default chunk size is 64k when selecting Auto configuration.
1.
As the BIOS boots press Ctrl+S or F4 when prompted to enter
the RAID BIOS.
2.
At the next screen select Create RAID Set, then press Enter.
MN2000000107
Page 6
Advertisement
Table of Contents
