Table of Contents
Advertisement
3.
Select Striped, then press Enter.
4.
Select Auto configuration, then press Enter.
5.
When asked Are You Sure (Y/N)?, press Y to accept.
6.
Press Ctrl+E to exit the BIOS.
7.
When asked Are you sure to exit (Y/N)?, press Y to exit and
reboot.
8.
Continue with FDISK and FORMAT steps as if you were
installing a conventional hard drive.
Manual configuration
1.
As the BIOS boots press Ctrl+S or F4 when prompted to enter
the RAID BIOS.
2.
At the next screen select Create RAID Set, then press Enter.
3.
Select Striped, then press Enter.
4.
Select Manual configuration then press Enter
5.
Select the first drive, press Enter.
6.
Select the second drive, press Enter.
7.
Select chunk size from 4k, 8k, 16k, 32k, 64k or 128k, then press
Enter.
8.
When asked Are You Sure(Y/N)?, press Y to accept.
MN2000000107
Page 7
Advertisement
Table of Contents
