Related Manuals for Vantec UGT-PC341
Summary of Contents for Vantec UGT-PC341
- Page 1 USB 3.0 4-Port PCI Express Card User Manual Model: UGT-PC341 All brand names and trademarks are properties of their respective owners www.vantecusa.com...
-
Page 2: Table Of Contents
1.4 Package Contents ............5 Chapter 2: Getting Started ..........5 2.1 Hardware Installation ..........5 2.2 Driver Installation ............. 6 2.3 Hardware Verify ............8 2.4 Driver Uninstall ............9 Chapter 3: Troubleshooting Tips ........10 UGT-PC341 Page 2... -
Page 3: Chapter 1: Introduction
USB 2.0 High-Speed and USB 1.1 Full-Speed device. It is an ideal choice for external storage devices, MP3 players, external DVD Writer, Card Readers, digital cameras, webcams, networking, video devices, and all other USB devices. UGT-PC341 Page 3... -
Page 4: Features
Supports 4 downstream ports for all speeds Built-in 4-pin power connector for receiving extra power supply from system Hot-swapping feature allows you to connect/disconnect devices without powering down the system Support Windows® XP/Vista/7 (32/64 bit) UGT-PC341 Page 4... -
Page 5: System Requirements
2.1 Hardware Installation Turn off the power to your computer. Unplug the power cord and remove your computer’s cover. Remove the slot bracket from an available PCIe slot. To install the card, carefully align the card’s bus connector with UGT-PC341 Page 5... -
Page 6: Driver Installation
2.2 Driver Installation Insert the provided CD into your disk drive. At the Windows desktop click Start, then Run. Type D:\UGT-PC341\Setup.exe, then click OK. (Change D: to match your CD-ROM drive letter) Click “Next” to continue. Please check accept license agreement box, and click “Next” to continue. - Page 7 Select “VIA XHCI Host Controller Driver” and press “Next”. Please review settings before install the driver, and click “Next” to continue. Click “Next” to continue. Click “Finish” to end of the driver installations steps. UGT-PC341 Page 7...
-
Page 8: Hardware Verify
After driver installation is complete, your must restart your computer. Note: We do not provide USB 3.0 driver for Mac and Linux OSs. 2.3 Hardware Verify Click on the “Device Manager” tab in the Windows Control Panel. Start > Control Panel > Device Manager UGT-PC341 Page 8... -
Page 9: Driver Uninstall
“VIA USB 2.0 Hub”, “VIA USB 3.0 Root Hub” and “VIA USB eXtensible Host Controller” in the Device Manager. 2.4 Driver Uninstall Click on the “Programs and Features” tab in the Windows Control Panel. Start > Control Panel > Programs and Features UGT-PC341 Page 9... -
Page 10: Chapter 3: Troubleshooting Tips
Entry “Uninstall or change a program” page, and double click “VIA Platform Device Manager” process driver uninstallation procedure. Chapter 3: Troubleshooting Tips If card and devices connected to the computer do not seem to be working properly, please perform below basic troubleshooting UGT-PC341 Page 10... - Page 11 How to deal with there is a yellow exclamation point on controller? Please shutdown your computer and move the card to another available slot then re-install USB 3.0 driver. Please point on this device then right-click on the mouse. UGT-PC341 Page 11...
- Page 12 USB devices. But the better way is using device self-power to satisfy it. Is it possible to connect current USB 1.1 or 2.0 devices to the USB 3.0 PCI Express card? Yes it works. Device will not obtain the USB 3.0 speed, but USB 2.0/1.1. UGT-PC341 Page 12...