Bi-D. Adjustment - Epson LX-300+ Service Manual

LX-300+/1170
5. Select setting value by LF/FF button.
Tear Off/ Bin LEDs and Paper Out LED show that menu's value by status of On/Off/
Blink/2-Blinks. That value can be changed by pressing Tear Off/ Bin button and the
LEDs status of On/Off/Blink/2-Blinks will be changed as the button is pressed.
6. When LF/FF button is pressed, the printer memorize the last setting value.
7. Repeat (4) to (6).
The other items can be changed in the same manner.
The menu selection will return to the first menu after the last menu selection is over.
8. Turn the printer off.
The setting is stored into non-volatile memory.
Table 1-19. Setting Menu
Item Setting / Value *2
3 inch, 3.5 inch, 4 inch, 5.5 inch, 6 inch, 7 inch, 8 inch, 8.5
Page length for tractor
inch, 11 inch, 70/6 inch, 12 inch, 14 inch, 17 inch
Skip over perforation OFF, ON
Auto tear off OFF, ON
Auto line feed OFF, ON
Print direction Bi-d., Uni-d., Auto
Software ESC/P2, IBM 2390 Plus
0 slash OFF, ON
High speed draft OFF, ON
I/F mode Auto, Parallel, Option
Auto I/F wait time 10 seconds, 30 seconds
19200BPS, 9600BPS, 4800BPS, 2400BPS, 1200BPS,
Baud rate
600BPS, 300BPS
Parity None, Odd, Even, Ignore
Data length 8 bit, 7 bit
Parallel I/F bidirectional mode OFF, ON
Packet mode Auto, OFF
PRODUCT DESCRIPTION
Item
Character table
International character set
for Italic table
Manual feed wait time
Buzzer
*1
Auto CR (IBM 2380 Plus)
*1
IBM character table
NOTE: *1: This setting is effective when IBM 2380 Plus emulation is selected.
NOTE: Setting with underline mean the standard factory settings.
NOTE: After W1xxxx Version.

1.4.2.4 Bi-d. Adjustment

Bi-d. adjustment can be adjusted by users. Bi-d. adjustment method is as follows.
1. Turning the printer on while pressing Pause switch. The guide to adjust Bi-d alignment
in this mode and the first alignment pattern will be printed.
2. Select the most closely aligned number by pressing LF/FF (
switches.
Font LEDs and Pause LED show the pattern number which is selected at that time. The
selection is advanced one by one as the switch is pressed, and the combination of On/
Off/Blink of those three LEDs is also changed according to the selection.
Operation
Table 1-19. Setting Menu
Setting / Value *2
Software version
Italic, PC437, PC850, PC860, PC863, PC865, PC861,
BARASCII, Abicomp, Roman8, ISO Latin 1, PC858, ISO
8859-15
NLSP version
Italic, PC437, PC850, PC437, Greek, PC853, PC855,
PC852, PC857, PC864, PC866, PC869, MAZOWIA, Code
MJK, ISO 8859-7, ISO Latin 1T, Bulgaria, PC774, Estonia,
ISO 8859-2, PC 866 LAT., PC 866UKR, PC APTEC,
PC708, PC720, PCAR 864, PC860, PC865, PC861, PC863,
BRASCII, Abicomp, Roman8, ISO Latin 1, PC858, ISO
8859-15, PC771
Italic U.S.A., Italic France, Italic Germany, Italic, U.K.,
Italic Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1
1 second, 1.5 seconds, 2 seconds, 3 seconds
OFF, ON
OFF, ON
Table2, Table1
↓
) and Load/Eject (
Revision C
↑
)
29