Bi-Directional Commands - Epson LX-300+ Service Manual

LX-300+/1170

1.5.3 Bi-Directional Commands

o
Reply printer ID
Reply printer ID: [ESC][SOH]@EJL[SP]ID[CR][LF]
The printer sends the following ID string in reply to this command.
@EJL[SP]ID[CR][LF]
MFG: EPSON;
CMD: ESCPL2,PRPXL24,BDC;
MDL: LX-300+;
CLS: PRINTER;
DES: EPSON[SP]LX-300+;
[FF]
LX-300+
o
Enter / Exit Remote Mode
n
Enter Remote Mode:
n
Exit Remote Mode:
o
Remote Commands
n
Change Printer Settings:
n
Reply Printer Settings:
XX is a string of 2 ASCII characters of defining a feature of the command. Following
[nL][nH] is two byte hexadecimal value that denotes the length of the [00H] and [ml]...[mx]
parameters. Last [m1] ... [mx] parameters are used to describe the detailed command
function and represent printer settings.
The printer sends the following string in reply to the commands of this type:
@BDC[sp]PS[CR][LF]
XX: Reply-Data;
[FF]
Table 1-22 shows the XXs that are provided in this printer.
PRODUCT DESCRIPTION
@EJL[SP]ID[CR][LF]
MFG: EPSON;
CMD: ESCP9,PRPII9,BDC;
MDL: LX-1170;
CLS: PRINTER;
DES: EPSON[SP]LX-1170;
[FF]
LX-1170
[ESC](R[08H][00H][00H]REMOTE1
[ESC][NUL][00H][00H]
XX[nL][nH][00H][ml]...[mx]
XX[nL][nH][01H][ml]...[mx]
<Remote commands>
-[Save] column shows that SV commands is effective to each feature or not.
¡
- : All parameters are saved.,
saved.
Table 1-22. Bi-Directional Commands
Function
Enter Remote-1
Exit Remote-1
Save settings
Initialize
Load power-on default
Select typeface
Select character pitch
Select draft or NLQ
Select character table
Assign character table
Select an international
character set
Turn 1 inch skip perforation
on/off
*1 Don't describe in manual.
*2 m1=0 to 1 only
*3 Only the following parameters are memorized. (Table 1-23)
Control codes
∆
: Some limited parameters are saved.,-: No parameter is
Code/ Parameter
ESC"(R"08H 00H 00H "REMOTE1"
ESC 00H 00H 00H
"SV" 00H 00H
"RS" 00H 00H
"LD" 00H 00H
"FO" 02H 00H 00H m1
m1=0(Roman), 1(Sans serif), 5(OCR-B)*1
"CP" 02H 00H 00H m1
m1=0(10cpi), 1(12cpi), 2(15cpi), 3 (17.1cpi),
4(20cpi), 5(Propotional)
"CQ" 02H 00H 00H m1
m1=0(Draft), 1(LQ), 2(High speed draft)
"CT" 02H 00H 00H m1
m1=0 (Table0), 1(Table1)
"AT" 04H 00H 00H m1 m2 m3
m1=0(Table0), 1(Table1)
m2, m3=(ESC/P2 Character Table No.)*4
"IC" 02H 00H 00H m1
m1=0(U.S.A), 1(France), 2(Germany), 3(U.K.)
4(Denmark1), 5(Sweden), 6(Italy), 7(Spain1),
8(Japan), 9(Norway), 10(Denmark2), 11(Spain2),
12(Latin America)
"SK" 02H 00H 00H m1
m1=0(off), 1(on)
Revision C
Save
-
-
-
-
-
∆*2
¡
¡
∆*3
∆*3
∆*5
¡
33