Epson LX-300+ Service Manual page 101

Product Name
Drive PF roller
Rear driven PF roller
Figure 6-5. PF Roller Assembly
Release shaft
Paper guide assy.
Figure 6-6. Paper Guide Assembly
Maintenance
Lubricate G-26 to the shaft of the drive
PF roller and the rear driven PF roller.
(4 places)
PF roller assembly:
G-26, 1/2 grain of rice
Set the paper guide assembly upside
down and lubricate at the touching part
of the PF roller assembly with the
release shaft. (4 places)
Paper guide assembly:
G-26, 1 grain of rice
Maintenance
Lubricate G-26 into the hole of the right
TR (tractor) frame facing to the TR
guide shaft and the left TR frame.
Tractor assembly:
G-26, 1/2 grain of rice
Figure 6-7. Tractor Assembly
The picture at the left is the back of the
Oil Pad
printhead.
1. Set the oil dispenser 0.30ml.
2. Lubricate O-2 on the Oil pad.
Oil pad:
O-2, 0.28-0.32 cc
Note: Make sure that the setting of the oil
dispenser is correct.
Figure 6-8. Oil Pad
Revision C
99