Packet Commands - Epson LX-300+ Service Manual

LX-300+/1170
o
Paper_path
Table 1-29. Paper_Path
paper_path
Continuous paper (rear)
Continuous paper (bottom)
Cut sheet (rear)
CSF Single bin
o
characteristic status code
Table 1-30. Characteristic Status Code
location
Structure version +0
Starting date +2
Total printing line number +8
Total power on hour +16
Total printing number for
+20
ribbon charge timing
o
MIB proxy information
"1G:"
"0305NA," Sheet feeder bin 1 (removable), capacity 5mm,
quantity of paper N.A.
"09NANA," Manual feed rear, capacity N.A., quantity of paper N.A.
"0CNANA;" Tractor rear, capacity N.A., quantity of paper N.A.
"TEC:06;" 9pin SIDM
PRODUCT DESCRIPTION
"<paper_path code>"
"0000"
"0001"
"0200"
"0100"
size type Refer to
2bytes "02" fixed
6bytes "yy", "mm, "dd" "SD" command
8bytes "nnnnnnnn" "TL" command
4bytes "nnnn" "TL" command
8bytes "nnnnnnnn" "TL" command

1.5.3.2 Packet commands

Function
Device ID request
Device ID reply (*1)
State-Reply request
State-Reply (*2)
No support command
NOTE: (*1) The reply string is as same as BDC-ID Reply.
NOTE: (*2) The reply string is as same as BDC-ST Reply.
-
Control codes
Table 1-31. Packet Commands
Code
"di" 01H 00H 01H
"@EJL" SP "ID" CR LF <Device ID string> FF
"st" 01H 00H 01H
"@BDC" SP "ST" CR LF <printer status string> FF
"XX:;" FF
(XX is the command string being invalid.)
Revision C
36