LX-300+/1170
Bushing, 11
Left frame
Figure4-13. Platen Removal
Disassembly and Assembly
Platen
Gear, 34
Bushing, 11
Platen grounding wire
Combination gear, 17.5, 27
Right frame
4.2.7.3 Carriage Unit Removal
1.
Remove the printer mechanism. (See 4.2.3 "Printer Mechanism Removal".)
2.
Remove the printhead. (See 4.2.1 "Printhead Removal".)
3.
Remove the timing belt from the carriage installation point.
Carriage Unit
Installation Point
4.
Remove the CR shaft grounding plate from the base frame on the left side of the
printer.
Disassembly and Assembly
Figure4-14. Timing Belt Removal
Revision C
Timing Belt
82