Pf Motor Assembly Removal - Epson LX-300+ Service Manual

LX-300+/1170
3. Remove the harness from the sensor (blue).
Release lever position sensor (blue)
Figure4-21. Release Lever Position Sensor Removal
C A U T I O N
When installing the release lever position sensor, be sure to insert it
between the release lever and the right frame.
Disassembly and Assembly

4.2.7.10 PF Motor Assembly Removal

1. Remove the printer mechanism. (See 4.2.3 "Printer Mechanism Removal".)
2. Remove the platen grounding wire from the platen.
3. Remove 1 screw (C.B.P., Tite, 3x10 F/ZN; Torque 0.59-0.78 N.M.) securing the PF
motor assembly to the right frame.
4. Remove 1 hook at the right frame securing the PF motor assembly to the right frame
and remove the PF motor assembly.
Platen grounding wire
C.B.P., Tite, 3x10 F/ZN
C H E C K When installing the PF motor assembly to the right frame, be careful
P O I N T
to align the position marking pin and motor bracket position marking
hole.
Disassembly and Assembly
Hook at the right frame
Figure4-22. PF Motor Assembly Removal
Revision C
PF motor assembly
Position marking pin
86