1. While the alarm bell or siren is sounding, enter your
user code and press COMMAND or present your card
to a reader while the Status List displays. The system
silences the alarm bell or siren.
2. If your system is programmed to send an Abort (alarm
cancel) report to the central station, the keypad
displays ALARM CANCELLED.
© 2003-2005 Digital Monitoring Products, Inc.
Information furnished by DMP is believed to be accurate and reliable.
This information is subject to change without notice.
Silencing an Alarm
Need help?
Do you have a question about the XR500 and is the answer not in the manual?