Silencing An Alarm - Security Command XR20 User Manual

Security system executive series

Hide thumbs Also See for XR20:

Table of Contents

When the alarm bell or siren is sounding, enter your user code or present your

card to a keypad or reader during the Status List display.

All/Perimeter or Home/Sleep/Away System

CANCEL

• If a burglar alarm is valid, press VERIFY to send a verification message

to the Central Station.

• If a valid alarm has not occurred, press CANCEL to cancel the alarm

and send an Abort or Cancel message to the Central Station. The

keypad displays ALARM CANCELLED and the security system will be

disarmed.

What to do when a trouble tone is sounding

You can silence the trouble tone by pressing any key. This only silences the

keypad and does not correct the condition that originally caused the problem.

Information furnished by DMP is believed to be accurate and reliable.

This information is subject to change without notice.

The XR20 panel is UL listed for Grade A Household Service and Commercial Burglary Service.

Silencing an Alarm

VERIFY displays.

Table of Contents

Command processor xr20