Opening The Casing - Fujitsu CELSIUS M4 Series Operating Manual

Opening the casing

The following illustrations show the CELSIUS R. The sequence of actions is identical for all
i
device variants and configuration levels.
► Switch the device off. The device must not be in energy-saving mode!
Please observe the safety information in the chapter "Important notes".
!
Disconnect the power plug from the mains outlet.
Only re-insert the power plug after you have closed the casing.
► Remove any connected cables that obstruct you at the unit.
► Place the device in a convenient working position.
The location of the screws for the transport lock can vary from the following illustration
i
depending on the device variant.
► Lay the device on its side on a stable, flat and clean surface.
A26361-K994-Z220-1-7619, Edition 2
► Remove the two transport lock screws (1)
on the back of the casing.
► Undo the safety screws of the side cover
on the back of the casing.
1
System upgrades
33