No Mouse Pointer Displayed On The Screen; Time And/Or Date Is Not Correct - Fujitsu CELSIUS M4 Series Operating Manual

No mouse pointer displayed on the screen

Cause
The mouse is not correctly
connected.
The mouse controller is not enabled.

Time and/or date is not correct

Cause
The time and date are incorrectly set.
The on-board backup battery in the
device is flat.
A26361-K994-Z220-1-7619, Edition 2
Troubleshooting
► Shut down the operating system properly.
► Schalten Sie das Gerät aus.
► Check that the mouse cable is properly connected
to the system unit.
If you use an adapter or extension lead with the
mouse cable, check the connections.
► Make sure that only one mouse is connected.
► Switch the device on.
The mouse controller must be enabled if you use a PS/2
mouse on the PS/2 mouse port.
► Check in the BIOS Setup that the mouse controller is
Enabled.
► Check that the mouse driver is properly installed
and is present when the application programme is
started. Detailed information can be found in the
user guide for the mouse and application
programme.
Troubleshooting
► Set the correct time and date within the operating
system you are using.
or
► Set the correct time and/or date in the BIOS Setup.
► If the time and date are repeatedly wrong when you
switch on your device, replace the lithium battery
(see "Changing lithium battery".)
Troubleshooting and tips
29