a
1
►
Push the slot cover into the slot (1).
Ensure that the projection (a) on the slot cover engages into the appropriate recess. If it
!
does not, you will find it difficult to close the locking rail. There is a danger of damage.
2
2
►
Press the clips (2) from outside, pressing through the cut-outs on the case rear panel until the
clips engage. When doing so, make sure that you press the rail carrier (b) into the
corresponding opening.
►
Fold closed the locking slide (3).
►
If you have removed the cross-piece, install it now (see "Installing the cross-piece").
Install the fan (see "Installing the side fan").
►
A26361-K994-Z220-1-7619, Edition 2
b
3
System upgrades
57