Removing An Accessible 5¼ Inch Drive - Fujitsu CELSIUS M4 Series Operating Manual

Removing an accessible 5¼ inch drive
The following illustrations show the CELSIUS R. The sequence of actions is identical for all
i
device variants and configuration levels.
► Open the casing (see "Opening the casing").
1 1
► Pull the data and the power supply connectors from the desired drive.
► Loosen the screws (1).
► Slide the drive out of the bay in the direction of the arrow (2) from behind.
The drive now protrudes slightly out of the casing.
► Slide the drive out of the casing (3).
► If necessary, make the required settings on the remaining hard disk drives.
A26361-K994-Z220-1-7619, Edition 2
System upgrades
2
3
65