Comnet CNGE8US Series Installation And Operation Manual

8 port gigabit ethernet unmanaged switch

INSTALLATION AND OPERATION MANUAL

CNGE8US Series

8 port Gigabit Ethernet unmanaged switch

The ComNet™ CNGE8US 8 port unmanaged Gigabit Ethernet switch is

designed to transmit and receive Gigabit Ethernet data using small form factor

pluggable (SFP) transceiver modules. It is environmentally hardened to operate

in demanding environments.

LED indicators are provided for confirming equipment operating status.

Packaged in the exclusive ComNet ComFit housing, these units may be wall-

or rack-mounted without modification, or may be DIN-rail mounted by using

ComNet model DINBKT1 adaptor plate, sold separately. See Figure A on Page 3

for installation instructions.

See Figures 1 – 3 for complete installation details.

INS_CNGE8US_REV–

06/10/11

PAGE 1

Table of Contents

Need help?

Do you have a question about the CNGE8US Series and is the answer not in the manual?

Page 1 Packaged in the exclusive ComNet ComFit housing, these units may be wall- or rack-mounted without modification, or may be DIN-rail mounted by using ComNet model DINBKT1 adaptor plate, sold separately. See Figure A on Page 3 for installation instructions. See Figures 1 – 3 for complete installation details.
Page 2 INSTALLATION AND OPERATION MANUAL CNGE8US SERIES FIGURE 1 – CNGE8US UP TO 8 CONNECTIONS AS DETERMINED BLACK BY SELECTION OF SFP MODULES BLACK WITH WHITE STRIPE FIGURE 2 – CNGE8US FIGURE 3 – LED INDICATORS FRONT PANEL REAR PANEL PORT ACTIVITY POWER (1 –...
Page 3 8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET INS_CNGE8US_REV– 06/10/11 © 2011 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC. PAGE 3...