Related Manuals for Comnet CNFE10MS
Summary of Contents for Comnet CNFE10MS
-
Page 1: Quick Installation Guide
CNFE10MS QIG (7) 10/100TX + (3) 100Mbps RJ-45 / 100FX SFP Industrial Fast Ethernet Managed Switch Quick Installation Guide V1.00 www.comnet.net... -
Page 2: Hardware Installation
Power Supply 2. Mounting the unit - You can mount the din-rail clip on the rear of ComNet CNFE10MS on the DIN rail. 3. Power the unit and connect to network 3.1 Connect the PWR1 / PWR2, and the unit will power on. PWR1 / PWR2 LED will turn Red to show unit booting up. - Page 3 1.1 Go to Start -> Program -> Accessories -> Communication -> Hyper Terminal 1.2 Give a name to the new console connection. 1.3 Choose the COM name, and select the correct serial settings. The serial settings of the CNFE10MS are as below: Baud Rate: 9600 / Parity: None / Data Bit: 8 / Stop Bit: 1 1.4 After connected, you can see Switch login request.
- Page 4 ComNet Customer Service Customer Care is ComNet Technology’s global service center, where our professional staffs are ready to answer your questions at any time. Email address of ComNet Global Service Center: customercare@ComNet.com Communication Networks 3 Corporate Drive Danbury, CT 06810...
Need help?
Do you have a question about the CNFE10MS and is the answer not in the manual?
Questions and answers