Set User Password - Avalue Technology ENX-US15WP User Manual

2.2.9

Set User Password

You can set user password. It is able to enter/change the options of setup menus.
Follow these steps to change the password.
Choose the "Set User Password" option from the "Initial Setup Screen" menu and
press <Enter>. The screen displays the following message:
Please < Enter Password >
Press <Enter>.
If the CMOS is good and this option has been used to change the default password,
the user is asked for the password stored in the CMOS. The screen displays the
following message:
Type the current password and press <Enter>.
After pressing <Enter> (ROM password) or the current password (user-defined), you
can change the password stored in the CMOS. The password must be no longer than
eight (8) characters. Remember, to enable the password setting feature, you must first
select either "Setup" or "System" from the "Advanced BIOS Features" menu.
Confirm Password
User's Manual
ENX-US15WP 53