12th gen intel® core™ soc & celeron processor thin mini itx motherboard (78 pages)
Summary of Contents for Avalue Technology EBM-SKLU
Page 1
EBM-SKLU Intel® 6th Generation ULT Processor 5.25” Mini Module User’s Manual Ed –28 April 2016 Part No. E2047582701R...
Page 2
Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the...
Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
A product returned without proof of the purchase date is not eligible for warranty service. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. 4 EBM-SKLU User’s Manual...
1.2 Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: 1 x EBM-SKLU Intel® 6th Generation ULT Processor 5.25” Mini Module 1 x Driver/Utility DVD-ROM ...
We strongly recommend that you study this manual carefully before attempting to set up EBM-SKLU or change the standard configurations. Whilst all the necessary information is available in this manual we would recommend that unless you are confident, you contact your supplier for guidance.
Dual display HDMI HDMI 1.4b Dual channel 24-bit LVDS (CH7511B) LCD Interface 2 x 20 pin Hirose Connector for (Optional BOM for 1 x internal eDP or 1 x CH7511B LVDS for 2 x 24-bit. ) EBM-SKLU User’s Manual 11...
EBM-SKLU User’s Manual 1.6 Architecture Overview—Block Diagram The following block diagram shows the architecture and main components of EBM-SKLU. 14 EBM-SKLU User’s Manual...
In Serial Port 1 mode RS-232 RS-422 RS-485 In Serial Port 2 mode RS-232 RS-422 RS-485 AT SEL ATX SEL Touch off Touch on 2.3.2 Serial port 1/2 RS-232/422/485 mode select (JCOM_SEL1/2) RS-232* RS-422/ 485 JCOM_SEL1 JCOM_SEL2 * Defaul EBM-SKLU User’s Manual 19...
User’s Manual 2.3.13 SATA Power connector 1/2 (SATAPW1/2) Signal SATAPW2 SATAPW1 2.3.14 Power connector (DCIN1) Signal Signal +VIN_26V +VIN_26V EBM-SKLU User’s Manual 25...
If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" button on the system case. You may also restart by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. 32 EBM-SKLU User’s Manual...
Note: Some of the navigation keys differ from one screen to another. To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. EBM-SKLU User’s Manual 33...
BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. 34 EBM-SKLU User’s Manual...
<Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. EBM-SKLU User’s Manual 35...
Visit the Avalue website (www.avalue.com.tw) to download the latest product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. 36 EBM-SKLU User’s Manual...
Enable or Disable Storage Hierarchy. Enabled[Default], Disabled Enable or Disable Endorsement Endorsement Hierarchy Enabled[Default], Hierarchy. Select the TCG2 Spec Version Support. 1.0[Default], 1.0: the Compatible mode for TPM2.0 UEFI Spec Version Win8/Win10, 1.x: For TCG2 newer spec for Win10. EBM-SKLU User’s Manual 37...
Disabled[Default], ErP Function ErP Function (Deep S5). Enabled Off[Default] PWR-On After PWR-Fail AC loss resume. Last state Disabled[Default], 30 sec 40 sec 50 sec Watch Dog Select WatchDog. 1 min 2 min 10 min 30 min 38 EBM-SKLU User’s Manual...
Extension. Note: iAMT H/W is always Disabled Intel AMT enabled. This option just controls the Enabled[Default], BIOS extension execution. If enabled, this requires additional firmware in the SPI device. Disabled[Default] OEMFlag Bit 15: Un-Configure ME Un-Configure ME Enabled, without password. EBM-SKLU User’s Manual 39...
Set Parameters of Serial Port 3 (COMC). Serial Port 4 Configuration Set Parameters of Serial Port 4 (COMD). Serial Port 5 Configuration Set Parameters of Serial Port 5 (COME). Serial Port 6 Configuration Set Parameters of Serial Port 6 (COMF). EBM-SKLU User’s Manual 41...
3.6.2.5.1 Serial Port 1 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.5.2 Serial Port 2 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 42 EBM-SKLU User’s Manual...
3.6.2.5.3 Serial Port 3 Configuration Item Option Description Enabled[Default], Enable or Disable Serial Port Serial Port Disabled (COM). 3.6.2.5.4 Serial Port 4 Configuration Item Option Description Enabled[Default], Enable or Disable Serial Port Serial Port Disabled (COM). EBM-SKLU User’s Manual 43...
3.6.2.5.5 Serial Port 5 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.5.6 Serial Port 6 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 44 EBM-SKLU User’s Manual...
3.6.2.6 H/W Monitor Item Options Description Enabled, Smart Fan Function Enables or Disables Smart Fan. Disabled[Default] 3.6.2.7 S5 RTC Wake Settings Item Options Description Wake system from S5 Disabled[Default], Enable or disable System wake on alarm EBM-SKLU User’s Manual 45...
Select Dynamic Time, System will wake on the current time + Increase minute(s). 3.6.2.8 Serial Port Console Redirection Item Options Description Disabled[Default], Console Redirection Console Redirection Enable or Disable. Enabled 3.6.2.8.1 Legacy Console Redirection Settings 46 EBM-SKLU User’s Manual...
When enabled, a VMM can utilize the Disabled Intel Virtualization Technology additional hardware capabilities provided Enabled[Default] by Vanderpool Technology. Disabled Turbo Mode Turbo Mode. Enabled[Default] Disabled CPU C states Enable or disable CPU C state. Enabled[Default] EBM-SKLU User’s Manual 47...
Aggressive LPM Support Disabled state. Enabled[Default] Port 0/1/2 Enable or Disable SATA Port. Disabled, Hard Disk Drive [Default] Identify the SATA port is connected to Solid SATA Device Type Solid State Drive State Drive or Hard Disk Drive. EBM-SKLU User’s Manual 49...
Maximum time the device will take before it properly reports itself to the Host Controller. Auto[Default] ‘Auto’ uses default value: for a Root port it is Device power-up delay Manual 100ms, for a Hub port the delay is taken form Hub descriptor. EBM-SKLU User’s Manual 51...
Maximum Memory Maximum Memory Frequency Selections in /1800/1867/2000/2133/2200 Frequency Mhz. /2400/2600/2667/2800/2933 /3000/3200 Dynamic[Default] Maximum Value of TOLUD. Dynamic 1GB/1.25GB/1.5GB/1.75GB assignment would adjust TOLUD Max TOLUD /2GB/2.25GB/2.5GB/2.75GB automatically based on largest MMIO length /3GB/3.25GB/3.5GB of installed graphic controller. 54 EBM-SKLU User’s Manual...
Disabled[Default], and root ports for faster enumeration. Option to disable Compliance Mode. Default FALSE[Default], XHCI Disable Compliance Mode is FALSE to not disable Compliance Mode. TRUE Set TRUE to disable Compliance Mode. 3.6.3.2.3 HD Audio Configuration 58 EBM-SKLU User’s Manual...
HD Audio Enabled disabled Enabled = HDA will be Auto[Default], unconditionally enabled Auto = HDA will be enabled if present, disabled otherwise. 3.6.4 Security Administrator Password Set setup Administrator Password User Password Set User Password EBM-SKLU User’s Manual 59...
Disabled[Default] initialization of a minimal set of devices Fast Boot Enabled required to launch active boot option. Has no effect for BBS boot options. Boot Option #1 Set the system boot order. 3.6.6 Save and exit 62 EBM-SKLU User’s Manual...
This option restores all BIOS settings to the factory default. This option is useful if the controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting. 3.6.6.4 Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem devices. EBM-SKLU User’s Manual 63...
EBM-SKLU User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. 64 EBM-SKLU User’s Manual...
Windows 8.1 operation system. If the warning message Step 3. Click Install. appears while the installation process, click Continue to go on. Step1. Click Next. Step 4. Setup completed. Step 2. Click Accept. EBM-SKLU User’s Manual 65...
If the warning message appears while the installation Step 3. Click Next. process, click Continue to go on. Step1. Click Next to start installation. Step 4. Click Next. Step 2. Click Next to proceed setup. Step 5. Click Next. 66 EBM-SKLU User’s Manual...
Step 3. Click Next to continue installation. process, click Continue to go on. Step 4. Installing. Step1. Click Next to start installation. Step 5. Click Finish to complete setup. Step 2. Click Next. EBM-SKLU User’s Manual 69...
\Driver_Audio\Realtek\ALC233\EBM-SKLU_Audio. Note: The installation procedures and screen shots in this section are based on Windows 8.1 operation system. Step 3. Click Finish to complete the setup. Step 1. Click Next to continue setup. Step 2. Installing. 72 EBM-SKLU User’s Manual...
Note: The installation procedures and screen shots in this section are based on Windows 8.1 operation system. Step 3. Click Next. Step 4. Click Next. Step 1. Click Next to continue installation. Step 5. Installing. Step 2. Click Next. EBM-SKLU User’s Manual 75...
\Utility\EBM-SKLU_TPM2.0 Note: The installation procedures and screen shots in this section are Step 3. Setup completed. based on Windows 7 operation system. Step 1. Click Yes to continue setup. Step 2. Installing. EBM-SKLU User’s Manual 77...
Step 3. Click Next to continue installation. appears while the installation process, click Continue to go on. Step 4. Installing. Step1. Click Next to start installation. Step 2. Click Next. Step 5. Click Finish to complete setup. 78 EBM-SKLU User’s Manual...