Table of Contents
Advertisement
1.6.9
Audio Line-In Connector (LINE_IN)
1.6.10
ATX Power Connector (MATXPWR2)
This connector is for ATX power supply plugs. The power supply plugs are designed to fit
this connector in only one orientation. Find the proper orientation and push down firmly until
the connectors completely fit.
Important notes on the Motherboard Power Requirements
Make sure that your ATX 12V power supply can provide 5A on
the +12V lead and at least 2A on the +5-volt standby lead
(+5VSB). The minimum recommended wattage is 36W, or 65W
for a fully configured system. The system can become unstable
and might experience difficulty powering up if the power supply is
inadequate.
You must install a PSU with a higher power rating if you intend to
install additional devices.
User's Manual
ENX-US15WP
29
Advertisement
Table of Contents
