Pabx Access Code - Denver DDP-500 User Manual

SETTINGS

PABX ACCESS CODE

In some PABX which does not automatically obtain the exchange identification code to the public
network,
Then you may need to program up to maximum 4 digit public access code.
If your dial digits prefix is match with the PABX ACCESS CODE.
Your telephone will now automatically insert a dial pause after the exchange identification code.
STORE PABX NUMBER
1. Press the MENU button.
2. Press Down button until display shows BASE, Press OK to confirm
3. Display shows PIN :
4. Enter the pin code (1590 from new) , press OK to confirm
5. Press Down button until display shows PABX, press OK to confirm
6. Display will shows EMPTY
7. Enter numbers with maximum of 4 digits, Press OK to store.
Note: To modify the PABX access code, repeat step 1 to step 5. Then press C button takes you back
to the previous digit.
TO ACTIVATE And DEACTIVATE PABX ACCESS CODE
1. Press the MENU button.
2. Press Down button until display shows BASE, Press OK to confirm
3. Display shows PIN :
4. Enter the pin code (1590 from new) , press OK to confirm
5. Press Down button until display shows PABX, Press OK to confirm
6. If shows EMPTY means PABX ACCESS CODE OFF
If shows number means PABX ACCESS CODE ON , you can use C button to delete the number ,
7.
and then press OK button to turn PABX ACCESS CODE OFF
Your handset will go back to standby mode automatically after 30 seconds.
- 27 -