Register / Advance Register - Denver DDP-500 User Manual

EXTENDING
REGISTER HANDSET/BASE UNIT
If an additional handset is added to the system, it must be registered to the base unit.
REGISTER BASE UNIT/HANDSET
Press BASE page button
1.
Press MENU button on the handset.
2.
Press Down button until display shows HANDSET, Press OK button
3.
Press Down button until display shows SUBSCRIBE
4.
Press OK button display shows SUB BASE :
5.
Select the base units number by pressing on the keypad 1-4
6.
After a few seconds, the display will show the base units ID code( RFPI)
7.
Press OK button to confirm
8.
Press the registration code (1590 from new) when the text "PIN" is displayed
9.
Press OK button to confirm
10.
The handset will enter standby mode after a few seconds
11.
and hold down (about 10 seconds) until the base unit beep.
- 31 -