Deregister - Denver DDP-500 User Manual

EXTENDING

DEREGISTER

A handset can be de-registered from a base unit as follows:
Make sure that the other handset is in standby mode
1.
Press MENU button on the already registered handset.
2.
Press Down button until display shows BASE , Press OK button to confirm
3.
Display shows PIN :
4.
Enter the pin code (1590 from new) , Press OK button to confirm
5.
Press Down button until display shows REMOVE HS, Press OK button to confirm
6.
Press the handset identity number 1 to 7 which to de-register
7.
Press OK button to confirm
8.
Press C button to exit programming mode or press and hold C button to standby mode
9.
INTERCOM CALL
When two or more handsets are registered to the same base unit it is possible to call handset to
handset. This call is not charged for by your Network operator.
Press and hold the
1.
Enter the handset number of the handset you wish to call
2.
Press the talk button
3.
lNT button
to terminate the call
- 33 -