Base Unit Ringer Level - Denver DDP-500 User Manual

SETTINGS

BASE UNIT RINGER LEVEL

There are four setting available (off, low, medium and high) for the base unit ringer level.
Press the MENU button.
1.
Press Down button until display shows BASE
2.
Press OK button
3.
Display shows PIN :
4.
Enter the pin code (1590 from new)
5.
If pin code accept display shows FLASH TIME
6.
Press Down button until display shows VOLUME
7.
Press OK button display shows B VOLUME Y
8.
( Y is the ringer volume 1=OFF, 2=LOW, 3=MEDIUM, 4=HIGH )
9.
Select level by press on Up and Down button
10.
Press OK button to confirm
11.
Handset display shows FLASH TIME , and will go back to standby mode automatically after 30
12.
seconds
- 25 -