Direct Call (Baby Phone Feature); Activating Direct Call - Denver DDP-500 User Manual

SETTING
DIRECT CALL (baby call feature)
This feature enables the handset to be pre-programmed with an emergency number which can be
dialed automatically by pressing any button ( except the programming button).It is possible to answer
calls even if this feature is implemented. DIRECT will be displayed when the function is activated.
STORE AND ACTIVATIING THE DIRECT CALL NUMBER
Press the MENU button.
1.
Press Down button until display shows HANDSET, Press OK to confirm
2.
Display shows DIRECT, Press OK to confirm
3.
Display will shows EMPTY if from new or shows your previous number.
4.
Enter phone numbers with maximum of 25 digits
5.
Press OK to enable DIRECT CALL
6.
Note: To modify the baby call number, repeat step 1 to step 5. Then press C button takes you back to
the previous digit.

ACTIVATING DIRECT CALL

Press the MENU button
1.
Press Down button until display shows HANDSET, Press OK to confirm
2.
Display shows DIRECT, Press OK to confirm
3.
Display will show your direct call number.
4.
Press OK to activate DIRECT CALL
5.
DEACTIVATING DIRECT CALL
Press the MENU button two times within 0.5 second.
1.
2. You will hear two beep tone and resume to standby mode.
- 20 -