Base Units Ringer Melody - Denver DDP-500 User Manual

SETTINGS
BASE UNIT RINGER MELODY
There are four setting available (TYPE 1 TO 4 melody) for the base unit ringer.
Press the MENU button.
1.
Press Down button until display shows BASE
2.
Press OK button
3.
Display shows PIN :
4.
Enter the pin code (1590 from new)
5.
If pin code accept display shows FLASH TIME
6.
Press Down button until display shows MELODY
7.
Press OK button display shows B MELODY X (melody type 1 – 4)
8.
Select melody by press on Up and Down button
9.
Press OK button to confirm
10.
Handset display shows FLASH TIME , and will go back to standby mode automatically after 30
11.
seconds
- 24 -