Standby Status In Hunt Group - Aastra DT590 User Manual

Group Services
Û Ü
230
Notes:
The simplified call pick-up described above applies only if
the call that is picked up is for the group involved, or a
personal call for a member of the involved group.
If several calls are ringing within the same group, the oldest
call will be automatically selected. If several calls are ringing
within different secondary groups, the call that is picked up
will be automatically selected by the system.
Your extension may also be subject to call pick-up from
third party sets that belong to the same group as you.
The call pick-up access prefix within secondary groups
differs from one facility to another.

Standby Status in Hunt Group

When you belong to one or several hunt groups, you may also
manage your availability for answering calls that are directed to
your group(s).
This standby service enables you to temporarily withdraw from a
hunt group. Therefore, you would only receive personal calls, or
those that are directed to the groups from which you have not
withdrawn.
Once again, the system distinguishes your position in relation to
your primary group as well as your secondary groups.
To manage your group standby status, from an idle extension:
68
Dial the prefix "68" to proceed to standby within your primary
group.
Press
Wait for the Service Acceptance Tone
If your extension was active within your primary group, it will now
be on standby. On the other hand, if your extension was on
standby, it will now be active within your primary group.
MD Evolution – Cordless DT590