9.3
Resources
MENU: 1.8.2 (Single-company management) or 1.9.2 (Multi-company management)
9.3.1
Naming the trunk groups
One trunk group must be associated with one cell only. One cell contains from 1 to 8 base
stations.
MENU: 1.8.2.1 (Single-company management) or 1.9.2.1 (Multi-company management)
9.3.2
Defining a trunk group
This menu allows you associate a trunk group index to this cell.
Cells are associated with trunk groups in two phases:
•
the first involves naming the trunk groups; these names are chosen by the system installer.
•
the second phase involves associating the previously defined trunk groups with the cells
declared in the topology menu.
The above two operations allow you link a trunk group index to the cell.
Page 166
WIRELESS: RESOURCES
1 TRUNK GROUP NAMES
2 TRUNK GROUP DEFINITION
3 ALLOCATION OF BASE STATIONS
4 BASE STATION DISPLAY LIST
5 COVER DISPLAY
ENTER YOUR CHOICE
TRUNK GROUP NAMES
TRUNK GROUP 0
TRUNK GROUP 1
TRUNK GROUP 2
TRUNK GROUP 3
TRUNK GROUP 4
...
...
TRUNK GROUP 14
TRUNK GROUP 15
01/2007
TG0....
TG1....
.......
.......
.......
.......
.......
.......
.......
AMT/PTD/PBX/0020/2/4/EN