Write Text - Aastra DT590 User Manual

Local Phonebook
7777
444
º
º
194

Write Text

When writing text messages and adding/editing or searching for
names in the Phone Book, the keys 0 to 9, *, or # can be used. The
first character entered will be an upper level character followed by
lower level characters unless the *-key is pressed before entering
the character. When pressing a key, the first available character on
that specific key is displayed. To get the following characters, press
the key repeatedly. Key 0 and 1 contain special characters. The
marked character is selected after a time-out (3 seconds) or when
another key is pressed. Pressing key 1 adds space between the
characters and pressing the *-key switches between upper and
lower case. The first character entered in a message, or when
adding/editing a name in the Phone Book, will be an upper level
character followed by lower level characters unless the *-key is
pressed before entering the character.
Example (to write Smith):
6
Press for S.
Press for m.
8
Press for i.
44
Press for t.
Press for h.
Control keys
While entering a name or a number, you can use the following keys
for control and navigation:
Press the left navigation key to move to the left.
Note: Moves to the beginning of the text if held longer.
Press the right navigation key to move to the right.
*
Note: Moves to the end of the text if held longer.
Press to switch between upper and lower case.
Note: Pressed for more than one second will add a dial
1
tone pause.
Press to enter a space.
MD Evolution – Cordless DT590