Group Hunting; Standby Status In Hunt Group - Aastra DT690 User Manual

C P
ORDLESS HONE FOR
15.2
15.2.1
15.2.1.1
97
MD E
VOLUTION
member of the involved group. If several calls are ringing within
the same group, the oldest call will be selected automatically. If
several calls are ringing within different secondary groups, the
call that is picked up will be selected automatically by the system.
Your extension may also be subject to call pick-up from third
party sets that belong to the same group as you. The call pick-up
access prefix within secondary groups differs from one facility to
another.

Group Hunting

An internal group hunting number is a common directory number for a
group of extensions. Calls to the group will be indicated at a free exten-
sion in the group. When you leave the group temporarily, you make your
phone unavailable for incoming calls .

Standby Status in Hunt Group

When you belong to one or several hunt groups, you may also manage
your availability for answering calls that are directed to your group(s).
This standby service enables you to temporarily withdraw from a hunt
group, and receive only personal calls and calls directed to the groups
from which you have not withdrawn. The system distinguishes your posi-
tion in relation to your primary group as well as your secondary groups.
Standby Status For the Primary Group
To manage your standby status within your primary group, when your
extension is idle do the following:
1. Press 68 to change standby status within your primary group.
2. Press
Wait for the service acceptance tone.
If your extension was active within your primary group, it will now
be in standby mode. And if your extension was in standby mode, it
will now be active within your primary group.
In relation to your secondary groups, your extension's active or
inactive status is changed for all of them at the same time. In either
case the service acceptance tone is played.
3. Press
.
to finish the procedure.
1424-EN/LZT 103 090 Uen D 2010-02-12