Table of Contents
Advertisement
4.8.2 Reset Configuration Data
Default is Disable. Select enable to reset Extended System Configuration
Data (ESCD) if you have installed a new add-on and system econfigura-
tion has caused such a conflict that OS cannot boot.
4.8.3 Resources controlled by:
The commands here are "Auto" or "Manual." Choosing "manual"
requires you to choose resources from each following sub-menus. "Auto"
automatically configures all of the boot and Plug and Play devices but
you must be using Windows 95 or above.
4.8.4 PCI/VGA Palette Snoop
This is left at "Disabled."
4.9 PC Health Status
Figure 4.8: PC Health Status
By choosing the Frequency/Voltage Control option from the Initial Setup
Screen menu, the screen below is displayed. This sample screen contains
the manufacturer's default values for the AIMB-641.
37
Chapter 4
Advertisement
Table of Contents
