Pnp/Pci Configurations; Figure 2.7:Bios -- Pnp/Pci Configurations; Reset Configuration Data; Resources Controlled By - Advantech PCA-6289 User Manual

2.7 PnP/PCI Configurations.

Figure 2.7: BIOS -- PnP/PCI Configurations

2.7.1 Reset Configuration Data

Normally, you leave this field Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup if you have
installed a new add-on Card and the system reconfiguration has caused
such a serious conflict that the operating system cannot boot. The
choices: Enabled, Disabled.

2.7.2 Resources Controlled By

The Award Plug and Play BIOS has the capacity to automatically config-
ure all of the boot and Plug and Play compatible devices. However, this
capability means absolutely nothing unless you are using a Plug and Play
operating system such as Windows95. If you set this field to Manual, then
choose specific resources by going into each of the submenus that follows
this field. The Choice: Auto (ESCD), Manual.

2.7.3 PCI/VGA Palette Snoop

Leave this field at Disabled. The Choices: Enabled, Disabled.

2.7.4 PCI Latency Timer (CLK)

This item controls how long each PCI device can hold the bus before
another takes over.
PCA-6289 User's Manual 26