Table of Contents
Advertisement
Quick Links
Our company network supports you worldwide with offices in Germany, Austria,
Switzerland, Great Britain and the USA. For more information please contact:
FORTEC Elektronik AG
Hauptniederlassung
Lechwiesenstr. 9
86899 Landsberg am Lech
Telefon:
+49 (0) 8191 91172-0
Telefax:
+49 (0) 8191 21770
E-Mail:
sales@fortecag.de
Internet:
www.fortecag.de
FORTEC Elektronik AG
Büro Wien
Nuschinggasse 12
A-1230 Wien
Telefon:
+43 1 8673492-0
Telefax:
+43 1 8673492-26
E-Mail:
office@fortec.at
Internet:
www.fortec.at
The information contained in this document has been carefully researched and is, to the best
of our knowledge, accurate. However, we assume no liability for any product failures or
damages, immediate or consequential, resulting from the use of the information provided
herein. Our products are not intended for use in systems in which failures of product could
result in personal injury. All trademarks mentioned herein are property of their respective
owners. All specifications are subject to change without notice.
Manual
AIMB-782
ADVANTECH
FORTEC Elektronik AG
Büro West
Hohenstaufenring 55
50674 Köln
Telefon:
Telefax:
E-Mail:
Internet:
ALTRAC AG
(Tochter der FORTEC):
Bahnhofstraße 3
CH-5436 Würenlos
Telefon:
Telefax:
E-Mail:
Internet:
+49 (0) 221 272 273-0
+49 (0) 221 272 273-10
west@fortecag.de
www.fortecag.de
+41 (0) 44 7446111
+41 (0) 44 7446161
info@altrac.ch
www.altrac.ch
Advertisement
Table of Contents
Related Manuals for Advantech AIMB-782
Summary of Contents for Advantech AIMB-782
- Page 1 Manual AIMB-782 ADVANTECH Our company network supports you worldwide with offices in Germany, Austria, Switzerland, Great Britain and the USA. For more information please contact: FORTEC Elektronik AG FORTEC Elektronik AG Hauptniederlassung Büro West Lechwiesenstr. 9 Hohenstaufenring 55 86899 Landsberg am Lech 50674 Köln...
- Page 2 User Manual AIMB-782 ® LGA1155 Intel Core i7/i5/i3/ Pentium ATX with DVI/VGA, USB 3.0, DDR3, SATA III...
- Page 3 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
- Page 4 Whether your new Advantech equipment is destined for the labo- ratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Advantech has come to be known.
-
Page 5: Declaration Of Conformity
Caution! There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type recommended by the man- ufacturer. Discard used batteries according to the manufacturer's instructions. AIMB-782 User Manual... - Page 6 78.A1GC3.421 ELPIDA J1108BDBG-DJ-F (128x8) 96D3-2G1066NN-AP 4 GB DDR3 1066 78.B1GDJ.AF1 HYNIX H5TQ2G83BFR-H9C 1 GB DDR3 1066 D3UE28081XH18AB ELPIDA J1108BDSE-DJ-F (128x8) 2 GB DDR3 1066 D3UE28082XH18AB ELPIDA J1108BDSE-DJ-F (128x8) SAMSUNG 940 K4B2G0846B-HCF8 4 GB DDR3 1066 AQ12M64B8BKF8S (256x8) AIMB-782 User Manual...
- Page 7 It should be free of marks and scratches and in perfect working order upon receipt. As you unpack the AIMB-782, check it for signs of ship- ping damage. (For example, damaged box, scratches, dents, etc.) If it is damaged or it fails to meet the specifications, notify our service department or your local sales representative immediately.
-
Page 8: Table Of Contents
Board Layout: Jumper and Connector Locations........7 Figure 1.1 Jumper and Connector Locations....... 7 Figure 1.2 I/O connectors ............7 AIMB-782 Block Diagram................8 Figure 1.3 AIMB-782 Block Diagram ........... 8 Safety Precautions ..................8 Jumper Settings ..................9 1.8.1 How to set jumpers ............... - Page 9 Auxiliary 4-pin power connector (ATX12V1) ........... 29 2.22 SPI Flash connector(SPI_CN1) .............. 29 2.23 Low Pin Count Connector (LPC1)............30 Table 2.3: Advantech LPC Module List ........30 Chapter BIOS Operation ......... 31 Introduction ..................... 32 Figure 3.1 Main setup screen ........... 32 Entering BIOS Setup................
- Page 10 VGA Connector (VGA1) ................91 Table B.3: VGA Connector (VGA1) ........... 91 RS-232 Interface (COM1~6) ..............92 Table B.4: RS-232 Interface (COM1)......... 92 PS/2 Keyboard and Mouse Connector (KBMS1) ........92 Table B.5: Keyboard and Mouse Connector (KBMS1) ....92 AIMB-782 User Manual...
- Page 11 System I/O Ports................... 101 B.25 DMA Channel Assignments ..............101 Table B.23:DMA channel assignments........101 B.26 Interrupt Assignments ................101 Table B.24:Interrupt assignments..........101 B.27 1st MB Memory Map................102 Table B.25:1st MB memory map ..........102 AIMB-782 User Manual...
-
Page 12: Chapter 1 Hardware Configuration
Chapter Hardware Configuration... -
Page 13: Introduction
AIMB-782 the ideal platform for industrial networking applications. By using the Intel Q77 chipset, the AIMB-782 offers four 32-bit, 33 MHz PCI slots; one PCIe x1 slot, one PCIe x4 slot, one PCIe x16 slot and a variety of features such as 2 onboard SATA III interfaces (bandwidth = 600 MB/s) and 4 onboard SATA II with software RAID;... -
Page 14: Specifications
5 Gbps LPC: One LPC connector to support Advantech LPC modules, such as TPM module. GPIO: AIMB-782 supports 8-bit GPIO from super I/O for general purpose con- trol application. 1.3.4 Graphics Both dual and quad core processors are integrated Intel HD Graphics 2000/ 2500/3000/4000. -
Page 15: Industrial Features
Maximum: +5 V at 2.23 A, +3.3 V at 0.77 A, +12 V at 3.56 A, +5 VSB at 0.46 A (Intel Core i5 3550 3.0 GHz processor, 4 x 8 GB DDR3 Memory) Board size: 304.8 x 228.6 mm (12" x 9.6") Board weight: 0.5 kg (1.68 lb) AIMB-782 User Manual... -
Page 16: Jumpers And Connectors
Jumpers and Connectors Connectors on the AIMB-782 motherboard link it to external devices such as hard disk drives and a keyboard. In addition, the board has a number of jumpers that are used to configure your system for your application. - Page 17 +5 V USB port 9/10/13/14 power source switch between +5 V_DUAL JUSBPWR3 and +5 V GPIO1 8 bit GPIO from super I/O SMBUS1 SM Bus from PCH LPC1 Low pin count connector JMECLR1 Clear ME DHCP setting AIMB-782 User Manual...
-
Page 18: Board Layout: Jumper And Connector Locations
Board Layout: Jumper and Connector Locations JCMOS1 Figure 1.1 Jumper and Connector Locations AIMB-782QG2 Figure 1.2 I/O connectors AIMB-782 User Manual... -
Page 19: Aimb-782 Block Diagram
AIMB-782 Block Diagram Figure 1.3 AIMB-782 Block Diagram Safety Precautions Warning! Always completely disconnect the power cord from your chassis when- ever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sud- den power surges. -
Page 20: Jumper Settings
1.8.2 CMOS clear (JCMOS1) The AIMB-782 motherboard contains a jumper that can erase CMOS data and reset the system BIOS information. Normally this jumper should be set with pins 1-2 closed. If you want to reset the CMOS data, set J1 to 2-3 closed for just a few sec- onds, and then move the jumper back to 1-2 closed. -
Page 21: Watchdog Timer Output (Jwdt1)
1.8.3 Watchdog timer output (JWDT1) The AIMB-782 contains a watchdog timer that will reset the CPU. This feature means the AIMB-782 will recover from a software failure or an EMI problem. The JWDT1 jumper settings control the outcome of what the computer will do in the event the watchdog timer is tripped. -
Page 22: System Memory
1.11 Cache Memory The AIMB-782 supports a CPU with one of the following built-in full speed L3 caches: The built-in third-level cache in the processor yields much higher performance than conventional external cache memories. -
Page 23: Pci Bus Routing Table
1.13 PCI Bus Routing Table PCI1 PCI2 PCI3 PCI4 PCI slot INT AD16 AD21 AD22 AD28 AIMB-782 User Manual... -
Page 24: Chapter 2 Connecting Peripherals
Chapter Connecting Peripherals... -
Page 25: Introduction
Parallel Port (LPT1) The parallel port is normally used to connect the motherboard to a printer. The AIMB- 782 includes an onboard parallel port, accessed through a 25-pin flat-cable connec- tor, LPT1. AIMB-782 User Manual... -
Page 26: Usb Ports (Lan1_Usb56, Lan2_Usb34, Usb12, Usb78, Usb910, Usb1112 & Usb1314)
5 Gbps and fuse protection are supported. The USB interface can be disabled in the system BIOS setup. The AIMB-782 is equipped with one or two high-performance 1000 Mbps Ethernet LANs. They are supported by all major network operating systems. The RJ-45 jacks on the rear plate provide convenient 1000Base-T operation. -
Page 27: Usb Power Switch
JUSBPWR2 USB port 8/11/12 JUSBPWR3 USB port 9/10/13/14 AIMB-782 allows user to set USB power between +5 V_DUAL and +5 V. When the jumper is set as +5 V, the board doesn't support waked from S3 via keyboard or mouse. Note! When USB power is switched to +5V, it can't be connected with pow- ered KVM. -
Page 28: Vga Connector And Dvi-D Connector (Dvi1 + Vga1)
VGA Connector and DVI-D Connector (DVI1 + VGA1) The AIMB-782 includes both VGA and DVI-D interface that can drive conventional CRT and LCD displays. Pin assignments of VGA1 and DVI1 are detailed in Appendix AIMB-782 User Manual... -
Page 29: Serial Ports (Com1, Com2, Com3, Com4, Com5 & Com6)
COM5 COM6 The AIMB-782 offers Six serial ports (two on the rear panel and four onboard). JSETCOM3 is used to select the RS232/422/485 mode for COM3. These ports can connect to a serial mouse, printer or communications network. The IRQ and address ranges for those ports are fixed. -
Page 30: Ps/2 Keyboard And Mouse Connector (Kbms1)
PS/2 Keyboard and Mouse Connector (KBMS1) Two 6-pin mini-DIN connectors (KBMS1) on the rear panel of the motherboard pro- vide PS/2 keyboard and mouse connections. AIMB-782 User Manual... -
Page 31: External Keyboard & Mouse (Kbms2)
There is also an extra onboard external keyboard and mouse connector on the moth- erboard. This gives system integrators greater flexibility in designing their systems. CPU Fan Connector (CPUFAN1) If a fan is used, this connector supports cooling fans that draw up to 500 mA (6 W). AIMB-782 User Manual... -
Page 32: System Fan Connector (Sysfan1 And Sysfan2)
If a fan is used, this connector supports cooling fans that draw up to 500 mA (6 W). 2.11 Front Panel Connectors (JFP1, JFP2 & JFP3) There are several external switches and LEDs to monitor and control the AIMB-782. PWRSW RESET... -
Page 33: Power Led And Keyboard Lock (Jfp3)
System Off in deep sleep 2.11.2 External Speaker (JFP2 pins 1, 4, 7 & 10) JFP2 is a 8-pin connector for an external speaker. The AIMB-782 provides an onboard buzzer as an alternative. To enable the buzzer, set pins 7-10 as closed. 2.11.3 HDD LED Connector (JFP2 pins 2 &... -
Page 34: Line Out, Mic In Connector (Audio1Audio2)
Mic In can be connected to a microphone. 2.13 8-pin Alarm Board Connector (VOLT1) VOLT1 connects to the alarm board of Advantech chassis. These alarm boards give warnings if a power supply or fan fails, if the chassis overheats, or if the backplane malfunctions. -
Page 35: Case Open Connector (Jcase1)
2.14 Case Open Connector (JCASE1) JCASE1 is for chassis with a case open sensor. The buzzer on the motherboard sounds if the case is opened. AIMB-782 User Manual... -
Page 36: Front Panel Lan Indicator Connector (Lan_Led1)
2.15 Front Panel LAN Indicator Connector (LAN_LED1) Table 2.2: Front Panel LAN Indicator Connector LAN Mode Indicator G-LAN Link ON Green ON G-LAN Active Green Flash G-LAN Link Off Green OFF AIMB-782 User Manual... -
Page 37: Serial Ata Interface (Sata1, Sata2, Sata3, Sata4, Sata5 & Sata6)
Serial ATA Interface (SATA1, SATA2, SATA3, SATA4, SATA5 & SATA6) AIMB-782 features two high performance serial ATA III interfaces (up to 600 MB/s, blue connector) and four serial ATA II interfaces (up to 300 MB/s, black connector) with long, thin, easy-to-run SATA cables. -
Page 38: Pci Slots (Pci 1 ~ Pci 4)
PCI Slots (PCI 1 ~ PCI 4) The AIMB-782 provides four 32-bit / 33 MHz PCI slots. 2.18 PCIe x16 Expansion Slot (PCIEX16_1) The AIMB-782 provides a PCIe x16 slot for users to install an add-on peripheral card for extension requirements. AIMB-782 User Manual... -
Page 39: Pciex4_1
2.19 PCIEX4_1 2.20 PCIEX1_1 AIMB-782 User Manual... -
Page 40: Auxiliary 4-Pin Power Connector (Atx12V1)
12 V power to ensure the stable operation of the system. 2.22 SPI Flash connector(SPI_CN1) The pin header for SPI flash card can flash BIOS while AIMB-782 can not be power on and ensures platform integrity. AIMB-782 User Manual... -
Page 41: Low Pin Count Connector (Lpc1)
2.23 Low Pin Count Connector (LPC1) LPC connector on AIMB-782 is reserved for Advantech LPC modules. Table 2.3: Advantech LPC Module List Description PCA-TPM-00A1E TPM Module AIMB-782 User Manual... -
Page 42: Bios Operation
Chapter BIOS Operation... -
Page 43: Introduction
The Setup Utility uses a number of menus for making changes and turning the specific features on or off. This chapter describes the basic navigation of the AIMB-782 setup screens. Figure 3.1 Main setup screen AMI’s BIOS ROM has a built-in Setup program that allows users to modify the basic... -
Page 44: Entering Bios Setup
System Date using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> key or the <Arrow> keys to move between fields. The date must be entered in MM/DD/YY format. The time must be entered in HH:MM:SS format. AIMB-782 User Manual... -
Page 45: Advanced Bios Features Setup
3.2.2 Advanced BIOS Features Setup Select the Advanced tab from the AIMB-782 setup screen to enter the Advanced BIOS setup screen. You can select any of the items in the left frame of the screen, such as CPU configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>... -
Page 46: Figure 3.4 Pci Subsystem Settings
"Enable or Disable" 64 bit capable devices to be decoded in above 4G address space (only if system supports 64bit PCI decoding). PCI Common Settings PCI Latency Timer Value to be programed into PCI Latency Timer Register. VGA Palette Snoop "Enable or Disable" VGA palette registers snooping. AIMB-782 User Manual... -
Page 47: Figure 3.5 Pci Express Settings
Defines number of retry attempts software will take to retrain the link if previous training attempt was unsuccessful. Link Training Timeout Defines number of micro-secondes software that will wait before polling "Link Training " bit in link status register. Value range from 10 to 1000 uS. AIMB-782 User Manual... -
Page 48: Figure 3.6 Acpi Settings
"Auto or S1 only or S3 only" ACPI Sleep State Lock Legacy Resources "Enable or Disable" Lock Legacy Resources S3 Video Report "Enable or Disable" S3 Video Report PowerOn by Modem "Enable and Disable" PowerOn by Modem AIMB-782 User Manual... -
Page 49: Figure 3.7 Tpm Settings
3.2.2.3 Trusted Computing Figure 3.7 TPM Settings TPM Support “Enable or Disable” TPM Support. You can purchase Advantech LPC TPM mod- ule to enable TPM function. P/N: PCA-TPM-00A1E AIMB-782 User Manual... -
Page 50: Figure 3.8 S5 Rtc Wake Settings
3.2.2.4 S5 RTC Wake Settings Figure 3.8 S5 RTC Wake Settings Wake system with Fixed Time To "Enable or Disable" System wake on alarm event. The system will wake on the hr:min:sec as specified. AIMB-782 User Manual... -
Page 51: Figure 3.9 Cpu Configuration
When it is enabled through the BIOS, two 64-byte cache lines are fetched into a 128-byte sector, regardless of whether the additional cache line has been requested or not. You may choose to "Enable or Disable" it. AIMB-782 User Manual... -
Page 52: Figure 3.10Sata Configuration
3.2.2.6 SATA Configuration Figure 3.10 SATA Configuration SATA Controller(s) "Enable or Disable" SATA Controller SATA Mode Selection This can be configured as IDE, RAID or AHCI. AIMB-782 User Manual... -
Page 53: Figure 3.11Intel Trusted Execution Technology Configuration
To "Enable or Disable" Intel Trusted Execution Technology. If SMX is enabled, VT-D support must also be enabled prior to TXT. Note! Your hardware platform should support Trust Platform Module (TPM1.2) to enable Intel Trust Execution Technology. AIMB-782 User Manual... -
Page 54: Figure 3.12Amtconfiguration
Set timer to wait before sending ASF_GET_Boot_Options Disable ME Set ME to Soft temporary disable. "Enable or Disable" ASF (Alert specification format) Activate Remote Assistance Process Trigger CIRA boot USB Configure "Enable or Disable" USB Configure function AIMB-782 User Manual... -
Page 55: Figure 3.13Usb Configuration
Allows you to select the USB transfer time-out value. [1,5,10,20sec] Device reset time-out Allows you to select the USB device reset time-out value. [1,5,10,20sec] Device power-up delay This item appears only when you set the Device power-up delay item to [man- ual]. AIMB-782 User Manual... -
Page 56: Figure 3.14Super Io Configuration
3.2.2.10 Super IO Configuration Figure 3.14 Super IO Configuration Figure 3.15 Serial Port 1 Configuration AIMB-782 User Manual... -
Page 57: Figure 3.16Serial Port 2 Configuration
Figure 3.16 Serial Port 2 Configuration Figure 3.17 Parallel Configuration AIMB-782 User Manual... -
Page 58: Figure 3.18Pc Health Status
To select an optimal setting for parallel port. – Device Mode Parallel port could be selected as "ECP and EPP 1.9 Mode" and other set- tings. 3.2.2.11 H/W Monitor Figure 3.18 PC Health Status Case Open Warning AIMB-782 User Manual... -
Page 59: Figure 3.19Super Io Configuration
"Enable or Disable" SYSFAN Mode to SMART FAN setting 3.2.2.12 Second Super IO Configuration Figure 3.19 Super IO Configuration AIMB-782 supports 2nd super IO for COM 3~6, this page of BIOS menu is to set respective serial port configuration. AIMB-782 User Manual... -
Page 60: Figure 3.20Serial Port 3 Configuration
To select an optimal setting for serial port 3. – Device Mode When COM is to set as RS-422, it could support auto flow control function. This item is able to "Enable or Disable" auto flow control function. AIMB-782 User Manual... -
Page 61: Figure 3.21Serial Port 4 Configuration
Figure 3.21 Serial Port 4 Configuration Figure 3.22 Serial Port 5 Configuration AIMB-782 User Manual... -
Page 62: Figure 3.23Serial Port 6 Configuration
Change Settings To select an optimal setting for serial port 5. Serial Port 6 configuration – Serial Port To "Enable or Disable" Serial Port 6. – Change Settings To select an optimal setting for serial port 6. AIMB-782 User Manual... -
Page 63: Figure 3.24Smart Settings
3.2.2.13 SMART Settings Figure 3.24 SMART Settings SMART Self Test "Enable or Disable" SMART Self Test on all HDDs during POST. AIMB-782 User Manual... -
Page 64: Figure 3.25Cpu Ppm Configuration
"Enable or Disable" CPU C3 report to OS CPU C6 report "Enable or Disable" CPU C6 report to OS CPU C7 report "Enable or Disable" CPU C7 report to OS ACPI T State "Enable or Disable" ACPI T State support AIMB-782 User Manual... -
Page 65: Chipset
3.2.3 Chipset Figure 3.26 Chipset The page of Chipset provides information of chipset on AIMB-782. AIMB-782 User Manual... -
Page 66: Figure 3.27Pch-Io Configuration
"Enable or Disable" high precision event timer SLP_S4 Assertion Width Select a minimum assertion width of the SLP_S4# signal Restore AC Power Loss "Power off or Power on" or Last State to restore AC Power Loss AIMB-782 User Manual... - Page 67 3.2.3.2 PCI Express Configuration PCI Express Root Port 1 to 8 Setting. AIMB-782 User Manual...
- Page 68 Control the USB EHCI(USB2.0) functions. One EHCI controller must always be enabled. EHCI2 Control the USB EHCI(USB2.0) functions. One EHCI controller must always be enabled. USB Ports Pre-port Disable Control Control each of the USB ports disabling. AIMB-782 User Manual...
- Page 69 3.2.3.4 PCH Azalia Configuration Azalia Control detection of the Azalia device. Disable = Azalia will be unconditionally disabled Enable=Azalia will be unconditonally enabled Auto=Azalia will be enabled if present, disabled otherwise AIMB-782 User Manual...
-
Page 70: Figure 3.28System Agent (Sa) Configuration
3.2.3.5 System Agent (SA) Configuration Figure 3.28 System Agent (SA) Configuration VT-d "Enable or Disable" VT-d function. C-State Pre-Wake "Enable or Disable" C-State Pre-Wake feature AIMB-782 User Manual... - Page 71 DVMT Total Gfx Mem DVMT Total Gfx Mem optimal Between 128M, 256M or MAX Gfx Low Power Mode "Enable or Disable" Gfx Low Power Mode Graphics Performance Analyzers "Enable or Disable" Graphics Performance Analyzers AIMB-782 User Manual...
- Page 72 "Auto, Enable or Disable" PEG0 - Gen X PEG0 ASPM Control ASPM support for the PEG: Device 1 Function 0. This has no effect if PEG is not the currently active device Enable PEG "Auto, Enable or Disable" Enable PEG AIMB-782 User Manual...
- Page 73 30 seconds to power on after a power failure. On the other hand, system will auto power on if power is restored within 30 seconds, before 5VSB actually drops, even if "Restore AC Power Loss" is set to "power off". AIMB-782 User Manual...
-
Page 74: Boot
Set display mode for option ROM INT19 Trap Response “Immediate or Postponed” Option ROM to trap Interrupt 19 Boot Option #1/#2 Choose boot priority from boot device. There are three options: General USB Flash Disk 1100, UEFI, Disabled AIMB-782 User Manual... -
Page 75: Security
Security Figure 3.30 Security Select Security Setup from the AIMB-782 Setup main BIOS setup menu. All Security Setup options, such as password protection is described in this section. To access the sub menu for the following items, select the item and press <Enter>. -
Page 76: Save & Exit
Select Exit Discarding Changes from the Exit menu and press <Enter>. The fol- lowing message appears: Quit without saving? [Yes] [No] Select Yes to discard changes and exit. Discard Changes Select Discard Changes from the Exit menu and press <Enter>. AIMB-782 User Manual... - Page 77 AIMB-782 User Manual...
-
Page 78: Chapter 4 Chipset Software Installation Utility
Chapter Chipset Software Installation Utility... -
Page 79: Before You Begin
Before you begin To facilitate the installation of the enhanced display drivers and utility software, read the instructions in this chapter carefully. The drivers for the AIMB-782 are located on the software installation CD. Note! The files on the software installation CD are compressed. Do not attempt to install the drivers by copying the files manually. -
Page 80: Windows Xp / Windows 7 Driver Setup
Insert the driver CD into your system's CD-ROM drive. You can see the driver folder items. Move the mouse cursor over the folder "01.Chip". In folder, you will see an a Setup executable file, double click to complete the driver installation. AIMB-782 User Manual... - Page 81 Click setup to execute program. AIMB-782 User Manual...
-
Page 82: Chapter 5 Integrated Graphic Device Setup
Chapter Integrated Graphic Device Setup... -
Page 83: Introduction
Insert the driver CD into your system's CD-ROM drive. You can see the driver folder items. Navigate to the "02.Graphic" folder and click the executable file to complete the installation of the drivers for Windows 7, XP. AIMB-782 User Manual... -
Page 84: Chapter 6 Lan Configuration
Chapter LAN Configuration... -
Page 85: Introduction
Introduction The AIMB-782 has dual Gigabit Ethernet LANs via dedicated PCI Express x1 lanes (Intel 82579LM (LAN1) and 82583V (LAN2)) that offer bandwidth of up to 500 MB/ sec, eliminating the bottleneck of network data flow and incorporating Gigabit Ether- net at 1000 Mbps. -
Page 86: Chapter 7 Intel Me
Chapter Intel ME... -
Page 87: Introduction
"Intel ME" to install the driver. Note! If the Intel® Management Engine (Intel® ME) driver has not been suc- cessfully installed, you may see an error on a "PCI Simple Communica- tions Controller" in Device Manager. AIMB-782 User Manual... -
Page 88: Chapter 8 Intel Usb 3.0
Chapter Intel USB 3.0... -
Page 89: Introduction
Introduction AIMB-782 provides Intel® USB 3.0 and the data transfer rate of USB3.0(5Gbps) is 10 times to USB2.0(480Mbps). Installation Insert the driver CD into your system’s CD-ROM drive. Navigate to the ""05. Other" folder and find "Intel USB3.0" folder to install the driver. -
Page 90: Chapter 9 Sata Raid Setup
Chapter SATA RAID Setup... -
Page 91: Introduction
"readme.txt" which is in the folder "Intel Rapid Storage Technology" in "05. Other". The driver is in the CD’s “05. Other” folder.You may go to the directory of the CD and follow Intel's installation guide to install the driver and utility. AIMB-782 User Manual... -
Page 92: Appendix A Programming The Watchdog Timer
Appendix Programming the Watchdog Timer... -
Page 93: Watchdog Timer Overview
The AIMB-782’s watchdog timer can be used to monitor system software operation and take corrective action if the software fails to function within the programmed period. This section describes the operation of the watchdog timer and how to pro- gram it. - Page 94 Unlock NCT6776F Select register of watchdog timer Enable the function of the watchdog timer Use the function of the watchdog timer Lock NCT6776F AIMB-782 User Manual...
-
Page 95: Example Programs
Mov al,07h ; Select registers of watchdog timer Out dx,al Inc dx in al,dx Or al,08h Out dx,al ;----------------------------------------------------------- Dec dx; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;----------------------------------------------------------- AIMB-782 User Manual... - Page 96 Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;----------------------------------------------------------- Dec dx ; Set minute as counting unit Mov al,0f5h Out dx, al Inc dx In al,dx Or al, 08h AIMB-782 User Manual...
- Page 97 Dec dx ; Enable watchdog timer to be reset by mouse Mov al,0f7h Out dx,al Inc dx In al,dx Or al,80h Out dx,al ;----------------------------------------------------------- Dec dx ; lock NCT6776F Mov al,0aah Out dx,al Enable watchdog timer to be reset by keyboard AIMB-782 User Manual...
- Page 98 Mov dx,2eh ; unlock NCT6776F Mov al,87h Out dx,al Out dx,al ;----------------------------------------------------------- Mov al,07h ; Select registers of watchdog timer Out dx,al Inc dx Mov al,08h Out dx,al ;----------------------------------------------------------- Dec dx ; Enable the function of watchdog timer Mov al,30h AIMB-782 User Manual...
- Page 99 Dec dx ; Generate a time-out signal Mov al,0f7h Out dx,al ;Write 1 to bit 5 of F7 register Inc dx In al,dx Or al,20h Out dx,al ;----------------------------------------------------------- Dec dx ; lock NCT6776F Mov al,0aah Out dx,al AIMB-782 User Manual...
-
Page 100: Appendix B I/O Pin Assignments
Appendix I/O Pin Assignments... -
Page 101: Parallel Port (Lpt1)
Parallel Port (LPT1) Table B.1: Parallel Port (LPT1) Signal Signal STROBE* AUTOFD* ERR* INIT* ACK* SLIN# BUSY SLCT USB3.0 Header (USB12) Signal Signal USB1_V01 EUSB3_P0RXN EUSB3_P0RXP EUSB3_P0TXN EUSB3_P0TXP USB0_z_P- USB_z_P+ USB_OC#0_C USB1_z_P+ USB1_z_P- EUSB3_P1TXP EUSB3_P1TXN EUSB3_P1RXP EUSB3_P1RXN USBV01 AIMB-782 User Manual... -
Page 102: Usb2.0 Header (Usb78, Usb910, Usb1112 & Usb1314)
USB2.0 Header (USB78, USB910, USB1112 & USB1314) USB12 USB78 USB910 USB1112 USB1314 Table B.2: USB Header (USB78, USB910, USB1112, USB1314) Signal Signal USB_VCC5 USB_VCC5 USB1_D- USB2_D- USB1_D+ USB2_D+ VGA Connector (VGA1) Table B.3: VGA Connector (VGA1) Signal Signal GREEN BLUE H-SYNC V-SYNC AIMB-782 User Manual... -
Page 103: Interface (Com1~6)
RS-232 Interface (COM1~6) Table B.4: RS-232 Interface (COM1) Signal SOUT PS/2 Keyboard and Mouse Connector (KBMS1) Table B.5: Keyboard and Mouse Connector (KBMS1) Signal KB DATA KB VCC KB CLK M_DATA M_VCC M_CLK AIMB-782 User Manual... -
Page 104: External Keyboard Connector (Kbms2)
Infrared (IR) connector (JIR1) and JWDT1 and HW Monitor Alarm (JOBS1) Table B.7: Infrared Connector (JIR1) Signal Signal +5 V SRST# ERR_BEEP 5Vsb_JWDT IRTX IRRX OBS_BEEP System Fan Power Connector (SYSFAN1/ SYSFAN2) Table B.8: Fan Power Connector (SYSFAN1/SYSFAN2) Signal +12 V DETECT AIMB-782 User Manual... -
Page 105: Power Led And Keyboard Lock (Jfp3)
Table B.9: Power LED and Keyboard Lock (JFP3) Function LED power (3.3 V) #keylock B.11 External Speaker Connector (JFP2) Table B.10: External Speaker Connector (JFP2) Function SPK_VCC SPK_OBS SPK_BUZ SPK_OUT B.12 Reset Connector (JFP1) Table B.11: Reset Connector (JFP1) Signal RESET AIMB-782 User Manual... -
Page 106: Hdd Led Connector (Jfp2)
Table B.12: HDD LED Connector (JFP2) Signal HDD_LED+ SATA_LED# B.14 ATX Soft Power Switch (JFP1) Table B.13: ATX Soft Power Switch (JFP1) Signal PWR-BTN B.15 SNMP SM_BUS Bus Connector (JFP2) Table B.14: SM Bus Connector (JFP2) Signal SNMP_SDA SNMP_SCL AIMB-782 User Manual... -
Page 107: Usb/Lan Ports (Lan1_Usb34 And Lan2_Usb56)
Table B.15: USB Port Signal Signal VCC_DUAL Data0+ Data0- Table B.16: Giga LAN 10/100/1000 Base-T RJ-45 port Signal Signal MDI1- MDI0+ MDI2+ MDI0- MDI2- MDI1+ MDI3+ MDI3- B.17 Line Out, MIC IN Connector (AUDIO1_AUDIO2) Line Out MIC In AUDIO1_AUDIO2 AIMB-782 User Manual... -
Page 108: Front Panel Audio Connector (Fpaud1)
Table B.17: Front Panel Audio Connector (FPAUD1) Signal MIC2_L GND-A MIC2_R PRESENSE LIN2_R MIC2_JD FRONT-IO-SENSE LIN2_L LINE2-JD B.19 8-pin Alarm Board Connector (VOLT1) Table B.18: 8-pin Alarm Board Connector (VOLT1) Signal Signal 5VSB +5 V +3.3 V -12 V -5 V +12 V AIMB-782 User Manual... -
Page 109: Case Open Connector (Jcase1)
Table B.20: LAN LED Connector (LANLED1) Signal Signal LAN1LED0 LAN2LED1 VCC3_LAN1LED VCC3_LAN2LED LAN1LED1 LAN2LED2 LAN1_LED2 LAN2_LED0 +V3.3_LAN B.22 SPI_CN1: SPI Flash Card Pin Connector Table B.21: SPI_CN1:SPI fresh card pin connector Signal Signal +V3.3_SPI SPI_CS# SPI_CLK SPI_MISO SPI_MOSI AIMB-782 User Manual... -
Page 110: Fixed I/O Ranges Decoded By Intel Pch
RTC Controller RTC Controller RTC Controller DMA Controller, LPC, DMA Controller, LPC, PCI, or PCIe PCI, or PCIe DMA Controller DMA Controller 81h-83h DMA Controller and DMA Controller 84h-86h LPC, PCI, or PCIe DMA Controller DMA Controller AIMB-782 User Manual... - Page 111 SATA Controller, PCI, SATA Controller, PCI, 376h SATA or PCIe or PCIe SATA Controller, PCI, SATA Controller, PCI, 3F6h SATA or PCIe or PCIe Interrupt Controller Interrupt Controller Interrupt 4D0h-4D1h CF9h Reset Generator Reset Generator Processor I/F AIMB-782 User Manual...
-
Page 112: System I/O Ports
Interrupt from controller 2 (cascade) IRQ8 Real-time clock IRQ9 SCI IRQ IRQ10 Available IRQ11 COM3 ~ 6 IRQ12 PS/2 mouse IRQ13 Numeric data processor IRQ14 Available IRQ15 Available IRQ3 Communication port (COM2) IRQ4 Communication port (COM1) IRQ5 Available AIMB-782 User Manual... -
Page 113: 1St Mb Memory Map
1st MB Memory Map Table B.25: 1st MB memory map Addr. range (Hex) Device E0000h - FFFFFh BIOS CC000h - DFFFFh Unused C0000h - CBFFFh VGA BIOS A0000h - BFFFFh Video Memory 00000h - 9FFFFh Base memory AIMB-782 User Manual... - Page 114 Appendix B I/O Pin Assignments...
- Page 115 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2012...
- Page 116 Our company network supports you worldwide with offices in Germany, Austria, Switzerland, Great Britain and the USA. For more information please contact: FORTEC Elektronik AG FORTEC Elektronik AG Hauptniederlassung Büro West Lechwiesenstr. 9 Hohenstaufenring 55 86899 Landsberg am Lech 50674 Köln Telefon: +49 (0) 8191 91172-0 Telefon:...
Need help?
Do you have a question about the AIMB-782 and is the answer not in the manual?
Questions and answers