Left Crankcase Cover - Sym Jet 50 Service Manual

Left Crankcase Cover

Left crankcase cover removal
Remove left body side cover.
Remove air cleaner.
Remove kick start arm.
Remove left crankcase cover.
Disassembly of Kick Starter
Remove snap clip and thrust washer from left
crankcase cover.
Install kick start arm, rotate the lever slightly and
then remove driven gear and washer.
Remove the kick starter arm, kick starter spindle,
and return spring as well as socket.
Inspection of kick Starter
Check if starter spindle, driven gear for wear or damage.
Return spring
Starter spindle
This chapter Contents
7. "V" TYPE BELT DRIVE SYSTEM/KICK-STARTER
Bush
Left crankcase cover
Kick start arm
Return spring
Starter spindle
Snap ring
Thrust washer
Thrust washer
Driven gear
Friction spring
Driven gear
Bolt
Kick start arm
7-3