Side Covers; Luggage Box - Sym Jet 50 Service Manual

Side Covers

1. Removal:
Remove 3 screw (front/middle) from two
side covers.
Slide the side cover backward so that
their hooks are out of slots.
Take out the side cover end part and
then remove the cover.
2. Installation:
Install in reverse order of removal
procedures.
Caution
The tail of each cover is held with buckles
and slot, never pull them with force, or it
would crack the buckles.

Luggage Box

1. Removal:
Lift up seat cushion.
Remove battery compartment screw and
cover.
Remove luggage box mounting screws
(1 screw).
Remove luggage box nut (2 nuts)
Remove luggage box bolt (1 bolt)
Remove oil tank cap and oil guide
rubber.
Hold the luggage box in both front and
rear sides by two hands, and then lift up
the box to remove it.
2. Installation:
Install in reverse order of removal
procedures.
This chapter Contents
12. BODY COVER
Screws
Nut
Screw
Bolt
12-3