Left Crankcase Cover; Kick Starter Arm; V" Type Belt Driving System/Kick Starter Arm - Sym Fiddle III 50 Service Manual

SYM 8. V-BELT DRIVING SYSTEM/KICK STARTER ARM/STARTER CLUTCH

LEFT CRANKCASE COVER

Left crankcase cover removal
Remove air cleaner. (2 bolts)
Remove kick starter arm. (1 bolt)
Loosen vent strap on the front-left side of
cover, and then remove the vent.
Remove engine left-side cover (8 bolts).

KICK STARTER ARM

Disassembly
Remove left side cover plate on the left
crankcase cover(screws×6).
Remove left side cover plate gasket.
First put kick starter pedal into the starter
shaft. After a little rotation, remove the drive
gear and washer.
Removed kick starter pedal, starter shaft,
return spring and the thrust washer.
Check if starter shaft, drive gear, bushing, for
wear or damage. Replace it with new one if
necessary.
Check the return spring for spring force or
damaged. Replace it with new one if poor
parts found.
kick starter arm
Screws×6
Friction spring
drive gear
air cleaner lock bolts
Starter shaft
return spring
8-3