Sym Jet 50 Service Manual page 47

This chapter Contents
4. ENGINE REMOVAL
Engine removal
Spark plug
Remove body cover.
Remove the spark plug cap from the spark plug
section.
Fuel output tube Oil tube
Remove the fuel output and the vacuum tubes
from fuel pump.
Remove the oil control cable from oil pump.
Remove the oil tube from oil pump and then clip
the tube.
Fuel pump
Vacuum tube
Oil control cable
Remove the wire connectors of auto by starter Wire connector
and ACG.
Remove the upper part of the carburetor from its
upper side.
Remove the vapor emission vacuum tube from
carburetor intake manifold.
4-2