Edit Raid - Thecus N2800 User Manual

NOTE
WARNING
RAID Level
You can set the storage volume as JBOD, RAID 0, RAID 1, RAID 5, RAID 6, or
RAID 10 (depending on model).
Level
Model
N2800
N4800 Series
RAID configuration is usually required only when you first set up the device. A brief
description of each RAID setting follows:
RAID Levels
Level
JBOD
RAID 0
RAID 1
RAID 5
RAID 6
RAID 10
WARNING

Edit RAID

On the RAID Information screen, press the Edit button to go to the RAID
Information screen.
Using Edit RAID, you can select RAID ID and the Spare Disk.
Building a RAID volume may be time consuming, depending on the size of
hard drives and RAID mode. In general, if the RAID volume building process
is up to "RAID Building", then the data volume is accessible.
Creating RAID destroys all data in the current RAID volume. The data will be
unrecoverable.
JBOD RAID 0 RAID 1
 
 
Description
The storage volume is a single HDD with no RAID support. JBOD
requires a minimum of 1 disk.
Provides data striping but no redundancy. Improves performance
but not data safety. RAID 0 requires a minimum of 2 disks.
Offers disk mirroring. Provides twice the read rate of a single disk,
but same write rate. RAID 1 requires a minimum of 2 disks.
Data striping and stripe error correction information provided.
RAID 5 requires a minimum of 3 disks. RAID 5 can sustain one
failed disk.
Two independent parity computations must be used in order to
provide protection against double disk failure. Two different
algorithms are employed to achieve this purpose. RAID 6 requires
a minimum of 4 disks. RAID 6 can sustain two failed disks.
RAID 10 has high reliability and high performance. RAID 10 is
implemented as a striped array whose segments are RAID 1
arrays. It has the fault tolerance of RAID 1 and the performance
of RAID 0. RAID 10 requires 4 disks. RAID 10 can sustain two
failed disks.
If the administrator improperly removes a hard disk that should not be
removed when RAID status is degraded, all data will be lost.
53
RAID 5 RAID 6

  
RAID 10
