Thecus N2800 User Manual page 45

hard disks. A blank line indicates that a hard disk is not currently installed in that
particular disk slot.
NOTE
Disks Information
Item
Disk No.
Capacity
Model
Link
Firmware
Status
Bad Block scan
S.M.A.R.T. Information
On the Disk Information screen, the status of each disk will be displayed in the
Status column. Clicking on the OK or Warning link will display the S.M.A.R.T
Information window for that particular disk.
You may also perform disk SMART test (doesn't apply to SAS HDD); simply click
"Test" to start the SMART test. The result is only for reference and the system will
not take any action from its result.
• The screen shot below is just an example from a Thecus IP Storage. The disk
slots number can range from 8, 12 to 16 slots depending on the model of Thecus
IP storage.
Description
Indicates disk location.
Shows the SATA hard disk capacity.
Displays the SATA hard disk model name.
Displays the hard disk interface and link speed
Shows the SATA hard disk firmware version.
Indicates the status of the disk.
Yes to start scan Bad Block.
45