Thecus N2800 User Manual page 48

Using Create RAID, you can select stripe size, choose which disks are RAID disks
or the Spare Disk. .
RAID Configurations
Item
Disk No.
Capacity (MB)
Model
Status
Used
Spare
Master RAID
Stripe Size
Data Percentage
Create
Description
Number assigned to the installed hard disks.
Capacity of the installed hard disks.
Model number of the installed hard disks.
Status of the installed hard disks.
If this is checked, current hard disk is aalready part of a RAID
volume.
If this is checked, current hard disk is designated as a spare for a
RAID volume.
Check a box to designate this as the Master RAID volume. See the
NOTE below for more information.
This sets the stripe size to maximize performance of sequential
files in a storage volume. Keep the 64K setting unless you require
a special file storage layout in the storage volume. A larger stripe
size is better for large files.
The percentage of the RAID volume that will be used to store
data.
Press this button to configure a file system and create the RAID
storage volume.
48