Raid Information - Thecus N2800 User Manual

On the Disk Information screen, you may also perform disk bad block scan,
simply click "Click to start" to start the scan. The result is only for reference and the
system will not take any action from its result.
The testing result will display "Click to start" as default until the system reboots.

RAID Information

From the Storage menu, choose the RAID Management item and the RAID
Management screen appears.
This screen lists the RAID volumes currently residing in the Thecus IP storage.
From this screen, you can get information about the status of your RAID volumes,
as well as the capacities allocated for data.
RAID Information
Item
Master RAID
ID
RAID Level
Status
Disks Used
Total Capacity
Data Capacity
Create a RAID
On the RAID Information screen, press the Create button to go to the RAID
Volume Creation screen. In addition to RAID disk information and status, this
screen lets you make RAID configuration settings.
Description
The RAID volume currently designated as the Master RAID
volume.
ID of the current RAID volume.
NOTE: All RAID IDs must be unique.
Shows the current RAID configuration.
Indicates status of the RAID. Can read either Healthy,
Degraded, or Damaged.
Hard disks used to form the current RAID volume.
Total capacity of the current RAID.
Indicates the used capacity and total capacity used by user data.
47