Itunes® Server; Module Installation - Thecus N2800 User Manual

iTunes® Server
With the built-in iTunes server capability, Thecus IP storage enables digital music
to be shared and played anywhere on the network!
From the Network menu, choose the iTunes item, and the iTunes
Configuration screen appears. You may enable or disable the iTunes Service from
here. Once enabled, enter the proper information for each field and press Apply to
save your changes.
See the following table for a detailed description of each field:
iTunes Configuration
Item
iTunes Service
iTunes Server Name
Password
Rescan Interval
MP3 Tag Encode
Once the iTunes service is enabled, Thecus IP storage will make all music located in
the Music folder available for iTunes-equipped computers on the network.

Module Installation

From the login page, other than admin, web disk and Piczza (Photo server) the
module icon is a newly added feature for this FW release. After a module has been
installed, a new option will be available to "Show in Login".
If this option is enabled then, when login to the system, the module icon will be
available for all valid users to login through.
Description
Enable or disable the iTunes Service.
Name used to identify Thecus IP storage to iTunes clients.
Enter a password to control access to your iTunes music.
Rescan interval in seconds.
Specify tag encoding for MP3 files stored in Thecus IP storage. All
ID3 tags will be sent out in UTF-8 format.
100