Full Backup - Thecus N2800 User Manual

Remote Data backup
Item

Full Backup

Custom Backup
iSCSI Backup
Full Backup
Click on full backup and the setup screen appear as below. Fill in the remote target
IP (Destination) and port (need to be changed only if this port is already in use).
If encryption is required then enable it. Please make sure the associated target
server also has encryption enabled.
Carry on with inputting valid remote target server account name and password.
Description
The "Full backup" will have all shares from source backup to
destination. It could also create shares automatically from
destination if it is not existent. This only applies if the target
server is the same model as the source.
The "Custom backup" allows user to choose desired shares
backup to destination.
The "iSCSI backup" can backup iSCSI volume as single file
to destination.
105