DHCP/RADVD Server Configuration
A DHCP/RADVD server can be configured to assign IP addresses (IPv4) or Prefix
(IPv6) to devices connected to the associated NIC port.
DHCP Configuration
Item
DHCP/RADVD Service
Start IP (IPv4)
End IP in (IPv4)
Default Gateway (IPv4)
DNS Server 1,2,3 (IPv4)
Prefix (IPv6)
Prefix Length (IPv6)
WARNING
Linking Aggregation
The Thecus IP storage supports link aggregation from either on board network port
or additional NIC. Simply click on "+" as shown in the screen shot below.
Description
Enable or disable the DHCP/RADVD service to automatically
assign IP address to PCs connected to associate NIC interface.
Specifies the lower IP address of the DHCP range.
Specifies the highest IP address of the DHCP range.
Specifies gateway for the DHCP server service.
Displayed the DNS server IP address.
Specifies prefix
Specifies prefix length
The IP address of associated NIC should not be in the range of the Start IP
address and End IP address (IPv4).
41
Need help?
Do you have a question about the N2800 and is the answer not in the manual?
Questions and answers